ERRF 2023

BEL AIR, MARYLAND: SEPT 30th - OCT 1st 2023
BEL AIR, MARYLAND: SEPT 30th - OCT 1st 2023

photos by: David Wheeler

2023 Sponsors

Clockspring • Printcepts • Recreator3D • The Contrapposto Shop • Advanced 3D Printing • DeltaMaker • Euclid Probe • Lone Star Makers • NovaLabs • VAT Engineering • VerticalTX

Event 411

Sign up to receive event information.

BEL AIR, MARYLAND: SEPT 30th - OCT 1st 2023

Event Details

Harford Community College
Bel Air, Maryland

3D Printing Companies & Community Members Showing Off Their Latest & Greatest3D Printing Things!

  • Guest Speakers on our Speaking Stage
  • 3D Printed Fashion & Cosplay
  • 3D Printed Props & Replicas
  • 3D Printers of all shapes and sizes!
  • 3D Printed Pinewood Derby Races!
  • 3D Printed Art, Instruments, Toys & More!

Event Schedule

Saturday - 9/30

10:00 AM - Doors Open
10:30 AM - Registration for 3DP Derby - Upper Concourse
11:00 AM - 3DP Derby - Stock Class Races - Upper Concourse
11:30 AM - Death Racers - Event 1 - Loading Docks
12:30 PM - Top Fuel Drag Racers - Loading Docks
1:30 PM - 3DP Derby - Creatively Fast Class - Upper Concourse
3:00 PM - Death Racers - Event 2 - Loading Docks
5:00 PM - End of Day One

Sunday - 10/1

10:00 AM - Doors Open
11:30 AM - Death Racers - Event Finale - Loading Docks
12:30 PM - Top Fuel Drag Racers - Loading Docks
1:00 PM - 3DP Derby - Sponsor Class - Upper Concourse
4:00 PM - End of Event

2023 Arena Layout

Event 411

Sign up to receive event information.

BEL AIR, MARYLAND: SEPT 30th - OCT 1st 2023

The Build Platform

Saturday - 9/30

10:30 AM E3D x Diamondback: Collaboration Across the Pond - E3D and Diamondback
11:00 AM IC3D's Polyhex and the Future of 3D Printing Filaments - IC3D
12:30 PM Breaking Boundaries: A New Motion Systems for 3D Printing - Peopoly
12:45 PM - Open Sourcing Resin Printer with the Prometheus MSLA and Odyssey OS - Samuel Boutin
1:00 PM Duet3D
1:30 PM - Learning to Love the Limitations: Constraints and Creativity - Clockspring 3D
1:45 PM - JSketcher Free Browser Based CAD, Real Parametric Modeling - AutoDrop3D
2:15 PM - Practical Magic: Solving Real-World Challenges with Precision 3D Scanning - 3D HUB Canada
2:45 PM - 3D Printed Math - Joan Horvath
4:00 PM - 3D Printing for Science - Mason McNair
4:30 PM - Official Brand Profiles on - Making it a Norm for Companies to Release 3D Printable Models - Prusa

Sunday - 10/1

10:30 AM Adventures in Multicolor 3D Printing - Brady Hoak
11:00 AM Education and Training for Additive Manufacturing - Nicholas Knowlton
12:30 PM - Maker That Money Live - 3D Gloop
1:30 PM - The Recreator 3D: A Reflection on Home Recycling and The Communities Creating It! - Recreator 3D

Event 411

Sign up to receive event information.

BEL AIR, MARYLAND: SEPT 30th - OCT 1st 2023

Event 411

Sign up to receive event information.

Death Racers

The DeathRacers are making their way to the highly anticipated ERRF (East Coast RepRap Festival), creating a buzz of excitement among enthusiasts. This dynamic 3D printing battle has become the talk of the town, combining STEM (Science, Technology, Engineering, and Mathematics) with a dash of pure madness. For those eager to join this thrilling movement, there is still time to get involved. Visit the Facebook page, where you can dive into a community of like-minded individuals. This online hub serves as a platform for showcasing your ingenuity, exchanging ideas, and collaborating with fellow builders. Unleash your creativity and engineering skills to construct your very own DeathRacer, blending cutting-edge 3D printing technology with the high-speed thrills of racing. Don't miss this opportunity to be a part of an electrifying event that pushes the limits of possibility and fosters connections with fellow enthusiasts and industry pioneers.

Battle Round 1 – Saturday 11:30 AM

  • Warm-up Fun Speed Race Capture the BTT Flag - Teams of two compete to capture the flag and return it to win.
  • The Fresh Printz Jump Around - A challenging race to test endurance and build quality of the racers.

Battle Round 2 – Saturday 3:00 PM

  • Fabreeko Steal the Bacon - Free-for-all Capture the Flag race.
  • DeathRace - All-out battle where the last racer standing wins the prize pool. Sunday Racing: No warm-up, straight into the action!

Battle Round 3 – Sunday 11:30 AM

  • Demolition Derby Figure of 8 - Racers compete in a 10-lap race with crashes and collisions in a figure-of-8 track.
  • DeathRace - All-out battle where racers fight to be the last one standing, racing for their lives.

If you would like to build your own Death Racer, you can find all of the information here:

If you would like to build your own Death Racer, you can find all of the information here:
BEL AIR, MARYLAND: SEPT 30th - OCT 1st 2023

3D Printed Derby 2023

This year ERRF will have three classes with a stronger focus on the awesome creativeness of our 3d printing makers. This year we will have Stock class Creatively Fast class Concours/Show car class The Stock class is a pure racing class based on official BSA rules and has not changed since the 3d derby began in 2018. The Stock class is somewhat rule intense and is listed last below. The Creatively fast class allows you to use your imagination to make your fully or almost fully 3d printed car fast with minimal rules with the exception that the car must work on the track without disturbing other race cars or damaging the track in any way. Lastly the least regulated Concours/Show Car class, no racing for these cars, show off all your maker skills and let those fancy cream puffs shine.

The Concours/Show Car Class Rules

  • Cars purposely built for show car class WILL NOT RACE on the track, (wouldn’t want to get them scuffed up now) and should fit within a 4” wide x 8” long x 4” tall box
  • Cars should have working wheels and somewhat resemble a car
  • Cars may participate in Show car Class if they do not meet the rules of the other classes (fail to pass tech)
  • Other than that, design, 3d print, build and paint them till your masterpiece is ready!
  • Makers should focus on creativity
  • First and Second place winners are determined by attendee votes.

The Creatively Fast Class Rules

  • General
    • All the rules for the Creatively Fast class are centered around having a fully printed car (as much as possible, if not all of the car) that is compatible with the track and can race to the finish without impeding other racers. 
    • All weight is to be 3dprinted, no paint (lets see those layers), the car must work on the track and fit within the tech dimensions, minimal rules other than that. Nothing mechanical, no added propulsion, nothing but the beauty of 3d printing, and maybe a couple pairs of axles. 
    • 3D Print all of your car with the exception of axles if need be, and a dry lubricant! That’s it!!!

Cars must comply with the following to work on the race track:

  • Weight: not to exceed 6.0 ounces on a scale accurate to 1/10 ounce. For scales that have more than a single digit beyond the decimal point, the maximum weight is 6.0500000
  • Width: The maximum width of the car, including wheels and axles, must not exceed 2-3/4 inches. (69.85mm)
  • Length: Not to exceed 8 inches
  • Height not to exceed 3 inches
  • Bottom Clearance: The distance between the bottom of the wheels and the bottom of the lowest point of the car other than the wheels must be at least 3/8 inch. (9.5mm)
  • Width Between Wheels: The distance between the innermost edges of the left and right wheels must be at least 1-3/4 inches. (44.5mm)
  • Wheels: must be printed and not fall apart while racing.  In order to reduce risk of damaging the track surface no part of the car shall contact the track other than the wheels while racing.

****Your car must be built to go down the track, all the way, and not interfere with other cars or leave the track or anything on the track at any point, cars that violate this rule will be removed from the race. It is the racers responsibility to ensure the car rests securely against the starting pin when placed in the starting position and is wide enough to trigger electronic finish lines.****

The Stock Class Rules

• These rules have been adapted from traditional Pinewood Derby racing rules.
• A completed car purchased from a third party is not allowed. Racers are strongly encouraged to design and 3D print their own entries.
• The car may not be sent to third party facilities for tuning or other performance enhancements.

The main body structure(chassis) must be 3D printed. Any process/filament/material is fine. Any additions must be firmly attached, non-propulsive, and meet the following car size specifications. Car must fit into official race measuring box, maximum dimensions are detailed below.

  • Overall Width: not to exceed 2 3/4 inches (69.85 mm)
  • Length: not to exceed 7 inches (177.8mm)
  • Weight: not to exceed 5.0 ounces on a scale accurate to 1/10 ounce. For scales that have
    more than a single digit beyond the decimal point, the maximum weight is 5.0500000
  • Clearance: The wheels are the only part of the car allowed to touch the track.
  • Center rail width: Wheels must clear center guide rails, no less than 1 3⁄4 inches minimum. (44.5mm)
  • Car bottom: to clear a filled center rail, the bottom of the car should be no less than 3/8 inch from the surface (9.5mm)
  • Wheelbase: the distance between the center of the front and rear wheel must be no less than 4 inches.
  • Front: the front/leading edge of the car must be no more than 1 inch above the wheel lane of the track and be at least 1⁄2 inches wide (12.7mm) at the center of the car. NO NARROW POINTED FRONT ENDS.
  • When placed in the starting position, no part of the car may protrude beyond the starting pin.
    This rule ensures the car rests securely against the starting pin when placed in the starting
    position and is wide enough to trigger electronic finish lines. Another way to say this is no
    needle nose cars and no cars with a high front end. The needle nose makes it hard to align for
    a straight start and often does not trip the electronic sensor until enough of the car has passed
    to cover the hole.
  • At least 4 wheels must be attached to the sides of the car body. Each wheel must be attached
    to the car’s chassis with a legal axle.
  • Each attached wheel must not be angled(canted) more than 20 degrees from vertical.
  • The front most and rear most wheels must be positioned across the body from one another.
  • The complete inside and outside lettering of each wheel must be visible when the wheel is
    attached to the body.
    • One more note… The wooden blocks provided in traditional Derby kits measure:
      • 7 x 1.75 x 1.25 inches. (177.8 x 44.45 x 31.75mm) and working within these dimensions is
      • The following items are prohibited:
        • Springs
        • Starting devices or propellants
        • Electronic or lighting devices that interfere with the race electronics.
        • Liquids, wet paint, oil, sticky substance, or powders of any kind (other than axle lubrication)
        • Glass or excessively fragile parts
        • Bearings and or bushings
        • Hub caps covering the nail head
        • Loose/moving objects on or in the car
      • Although at least 4 wheels are required, it is not required that all 4 wheels touch the track
        surface. It can actually be difficult to get all 4 of the wheel s to touch. Most of the fastest cars
        have one front wheel raised slightly and not touching.
      • The rationale for 4 wheels is that it ensures the car will stay on the track and not slide off the
        center rail and collide with another car.
      • NOTE: Any covering of the interior of the wheel must be transparent(clear) and if using interior
        wheel weights there must be a slot that allows for rotating the wheel for interior inspection.
      • Washers/body treatments to help reduce friction ARE ALLOWED. Washers may be between the
        body and the wheel, and the wheel and the axle head.
      • Body treatments (between chassis and wheel) may be things like sprayed on graphite paint,
        Teflon tape, other slippery materials/waxes applied to the body


  • Only official BSA wheels are allowed. 3D Printed wheels will not be allowed.
  • All lettering and numbering, both inside and outside of the wheel, must remain complete and
    be visible with the wheel on the car.
  • The fluting, spokes and other markings on the outside wheel area must remain visible.
    (“Fluting” refers to the small bumps on the outside edge of the tread.)
  • The wheel diameter must be no less than 1.16 inches.
  • The tread surface width must be no less than 7.5 mm.
  • The tread surface must be flat and parallel to the wheel bore. Therefore, the following
    modifications are prohibited:
    • Rounding of the tread surface
    • Grooving, H cutting, or V cutting the tread surface
    • The following wheel modifications are prohibited:
      • Removing material from the inside tread surface or the inside sidewall surface
      • Drilling holes in the tread, sidewalls, or spoke area
      • Removing material from the sidewalls or spoke
      • Filling wheel tread with any type of material
      • Filling the wheel holes and re-drilling the bore
    • The rules permit many wheel modification so long as you observe the dimension limits and
      restrictions listed above. Common legal modifications include but are not limited to:
      • Truing the tread surface with sandpaper, straight edge, or lathe to correct “out of round”
      • Truing and shaping the inner edge of the thread surface
      • Narrowing the tread surface to 7.5mm to get straight edges
      • Applying wheel bore treatments such as polish and wax to smooth the bore.
      • Tapping the wheel bore
      • Truing and re-coning the tip of the inner hub
      • Removing the double step from the outer hub
      • Balancing the wheel by adding material such as glue or fingernail polish to the inside of the
      • Adding a transparent cover to the inside of the wheel to reduce air drag


  • Metal axles with a nail head are required with an overall diameter of no less than .084 inches.
  • One-piece axles that extend through the width of the car to support both wheels are not
  • You may use official BSA axles or after-market nail type axles from various vendors.
  • You may also polish and groove the axle provided that the journal portion of the axle (the part
    the wheel rides on) is no less than .084 inches, roughly the same diameter as the original BSA


  • Over application of lubricant, which results in excessive shedding onto the track is not allowed.
  • Only dry lubricants are allowed.


  • Weights may be used to bring a car to the maximum allowable weight.
  • Interior wheel weights are allowed as long as they allow for inspection of the interior of the

Some online vendors sell aftermarket BSA wheels that have been lightened by removing material
from inside the wheel surfaces. These wheels are NOT allowed and are easily recognized at
inspection. Cars with these wheels will NOT be permitted to race. If you plan to use aftermarket
wheels, confirm with the vendor that no weight is removed from inside the wheel.


  • Please check in and register your 3D Printed Derby racer at event by time posted/requested
  • Each car must pass inspection by the Official Inspection Committee before it may compete.
    The inspectors will disqualify any car not meeting these rules. While the inspectors’ decisions
    are final, every effort will be made to get accommodate all race entrants as best as possible.
    But please remember, inspectors’ decisions are final.
  • Every effort will be made to do the inspection without any altering of the car. If we can’t verify
    that the wheels have not been lightened due to interior wheel weights, air dams, fenders, or
    other reasons, we will ask YOU to take the wheels off for inspection.
  • After a car has passed inspection, only race officials may handle the car.
  • Cars will be placed on display racks until the time for the competition.
  • After check-in, adjustments are not allowed. Car repairs during the race are not allowed unless
    authorized by the race officials.
  • Once Inspection is PASSED before the race, the car will not be re-inspected after the race.
  • Good sportsmanship and behavior is expected. Race officials may ask anyone not following
    this rule to leave.

Event 411

Sign up to receive event information.

JC Print n Play "Fresh Prints of Bel Air"

"Fresh Prints of Belair" Best Print in Show contest!

Prizes provided by

Best In Print Category

The best in print category is for projects that are meant to be art! A bust of your favorite author or cartoon character? A diorama of your favorite scene in Back to the Future? Or maybe you took it further and built your own proton pack from Ghostbusters! Sanded, painted, or straight off the printer, all are welcome in the Best in Print!

The Mechanical Marvels Category

This is your chance to showcase a machine or electronics project that heavily relies on 3D printing. The majority of the project must be 3d printing, not just a few parts. Show us how you're using 3D printing to change the world!

***NOTE  NO entries of anything considered to be a "weapon" is allowed in either category. Nothing with a 'sharp edge' or anything considered to be any type of 'gun' is permitted.***

This contest is managed by James Cameron, @JCPrintNPlay on Twitter.

BEL AIR, MARYLAND: SEPT 30th - OCT 1st 2023

Event 411

Sign up to receive event information.

Leave a Reply

Your email address will not be published. Required fields are marked *